Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010, Command Reference Manual

Page: 675 / 1506

flash-disk initialize
Syntax
flash-disk initialize [ no-format ] [ disk0 | disk1 ]
Release Information
Command introduced before JUNOSe Release 7.1.0.
disk0 and disk1 keywords added in JUNOSe Release 7.2.0.
Privileged Exec mode added in JUNOSe Release 8.0.0.
Description
Performs a low-level format of unmounted flash cards. There is no no version.
Options
no-format—Erases all files but does not format the flash card
■
■
disk0—Specifies flash card in slot 0 of the SRP module; default value is disk0;
available only in Boot mode, because disk0 cannot be in an unmounted state in
a router outside of Boot mode
■
disk1—Specifies flash card in slot 1 of the SRP module; supported only on the
E120 router and the E320 router
Mode
Boot, Privileged Exec
flash-disk initialize
■ 633
Chapter 7: F Commands