Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010, Command Reference Manual

Page: 733 / 1506

host
Syntax
host hostname ipAddress [ ftp [ [ userAlgorithmType ] userName
[ [ passwordAlgorithmType ] password ] ] ] | [ tftp ]
no host hostname
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Adds or modifies an entry to the host table. The no version removes the specified
host.
Options
■
hostname —Hostname to add or modify; up to 20 characters
■
ipAddress —IPv4 or IPv6 address of the host
■
ftp—Specifies that the host is an FTP server; the default protocol if neither ftp
nor tftp is specified
■
userAlgorithmType —Type of username
■
0—Indicates that the userName is unencrypted; the default
■
8—Indicates that the userName is an encrypted password
■
userName —Username used to access an FTP server (but not an NFS server);
defaults to anonymous
■
passwordAlgorithmType —Type of password
■
0—Indicates that the password is unencrypted; the default
■
8—Indicates that the password is an encrypted password
■
password —Password used to access an FTP server (but not an NFS server);
defaults to null
■
tftp—Specifies that the host is a TFTP server
Mode
Global Configuration
host
■ 691
Chapter 9: H Commands