Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010, Command Reference Manual, Page: 636 / 1506

ethernet oam lfm remote-loopback
Syntax
ethernet oam lfm remote-loopback { start | stop } interfaceType interfaceSpecifier
Release Information
Command introduced in JUNOSe Release 11.1.0.
Description
Enables or disables remote loopback functionality on the remote OAM entity. Also
causes the remote peer to commence or halt sending of all received frames from
the local entity to the specified interface, except OAM PDUs, without any changes
made to the frames. OAM PDUs continue to be processed. By default, the remote
peer does not loop back the non-OAM PDUs that it receives from the local entity.
There is no
no version.
This configuration setting is not preserved across a reboot.
Options
■
start—Commences the remote loopback operation on the remote OAM entity
■
stop—Halts the remote loopback operation on the remote OAM entity; this is
the default behavior
■
interfaceType —One of the following interface types listed in “Interface Types
and Specifiers” on page 5
■
fastEthernet
■
gigabitEthernet
■
tenGigabitEthernet
■
interfaceSpecifier— Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5
Mode
Privileged Exec
Related Topics
■
OAM Remote and Local Loopback Feature
■
ethernet oam lfm remote-loopback supported on page 595
■
Configuring 802.3ah OAM Link-Fault Management
■
Example: Enabling Remote Loopback Support on the Local Interface
594 ■
ethernet oam lfm remote-loopback
JUNOSe 11.1.x Command Reference Guide A to M