Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010, Command Reference Manual

Page: 1012 / 1506

ip vrf
Syntax
ip vrf vrfName
no ip vrf vrfName [ wait-for-completion [ waitSeconds ] ]
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Creates a VRF or accesses VRF Configuration mode to configure a VRF. The no version
deletes the VRF.
NOTE: After creating the VRF, you must configure a route distinguisher for it via the
rd command; otherwise, the VRF will not operate.
Options
vrfName —Name of the VRF; a string of 1–32 alphanumeric characters
■
■
wait-for-completion—Specifies (in the absence of waitSeconds ) that the CLI waits
for completion of the no version operation before it returns a prompt, regardless
of how long that takes
■
waitSeconds— Number of seconds in the range 1–64000 that the CLI waits before
it returns a prompt, regardless of whether the no version operation has completed
Mode
Global Configuration
970 ■
ip vrf
JUNOSe 11.1.x Command Reference Guide A to M