Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010, Command Reference Manual

Page: 722 / 1506

halt
Syntax
The syntax of the command depends on whether you enter it from Boot mode or
Privileged Exec mode.
From Boot mode:
halt
From Privileged Exec mode:
halt [ force | primary-srp [ force ] | standby-srp [ force ] ]
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Stops operation on both SRP modules or on the specified SRP module. When the
high availability state is active or pending, this command ensures that the router
configuration, up to when you issued the
halt command, is mirrored to the standby
SRP module. There is no no version.
CAUTION: To prevent corruption of NVS, issue this command before you remove or
power down an SRP module.
Options
force—Prompts the user to confirm that the router should stop operation if the
SRP modules are in certain states, such as writing configuration data to NVS,
that could lead to loss of configuration data or corruption of NVS.
■
CAUTION: When the high availability state is active or pending, issuing the force
keyword does not guarantee that the configuration has been mirrored; recent
configuration changes may be lost if you issue the
force keyword.
■
primary-srp—Stops operation on primary SRP module only
■
standby-srp—Stops operation on standby SRP module only
Mode
Boot, Privileged Exec
680 ■
halt
JUNOSe 11.1.x Command Reference Guide A to M