Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010, Command Reference Manual

Page: 372 / 1506

broadcast
Syntax
broadcast { permit | deny }
no broadcast
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Modifies the subscriber policy for the broadcast protocol to define whether the
subscriber (client) interfaces that belongs to a bridge group or to a VPLS instance
forward (permit) or filter (deny) broadcast packets. The
no version restores the default
value, deny broadcast packets.
You cannot change the default subscriber policy values for trunk (server) interfaces
that belongs to a bridge group or to a VPLS interface. You also cannot change the
default subscriber policy values for a VPLS virtual core interface, which acts as a
trunk interface. The VPLS virtual core interface represents all of the MPLS tunnels
from the router to the remote VPLS edge (VE) device.
Options
permit—Specifies that the subscriber interface associated with the bridge group
or VPLS instance forwards broadcast packets
■
■
deny—Specifies that the subscriber interface associated with the bridge group
or VPLS instance filters broadcast packets
Mode
Subscriber Policy Configuration
330 ■
broadcast
JUNOSe 11.1.x Command Reference Guide A to M