Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010, Command Reference Manual

Page: 1447 / 1506

mpls rsvp authentication key
Syntax
{ ip | mpls } rsvp authentication [ key authkey ]
no { ip | mpls } rsvp authentication [ key [ authkey ] ]
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Assigns a key to the interface for MD5 authentication between RSVP peers. Assign
the key before you enable authentication on the interface. The
no version deletes
the MD5 key.
NOTE: Keys of up to 40 characters are supported for non–Juniper Networks
implementations. However, a key with more than 16 characters will cause an
authenticated link between E Series and M- or T-series routers to be inoperable.
Options
ip—Specifies alternative keyword for compatibility with non–E Series
implementations
■
■
mpls—Specifies JUNOSe MPLS implementation
■
authkey —Key used to create MD5 digest for messages sent from this interface
and to authenticate messages received on this interface; alphanumeric string in
the range 1–40 characters
Mode
Interface Configuration
mpls rsvp authentication key
■ 1405
Chapter 13: M Commands