manualshive.com logo in svg

Jäger ADwin-Pro, System And Hardware Description

The Jäger ADwin-Pro is a cutting-edge data acquisition and control system, offering unparalleled performance and flexibility. This comprehensive manual provides a detailed system and hardware description for users to maximize the potential of their device. Download it for free from manualshive.com to unlock the full capabilities of your ADwin-Pro.

Share
Download
background image

ADwin-Pro

 Hardware, manual version 2.9, June 2006

A-3

Annex

ADwin

Pro-AIn-8/16 Rev. B: Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  57
Pro-AIn-8/16 Rev. B: Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  57
Pro-AIn-8/16-D Rev. B: Pin assignment differential  . . . . . . . . . . . . . . . . . .  58
Pro-AIn-8/16 Rev. B: Board and front panel . . . . . . . . . . . . . . . . . . . . . . . .  58
Pro-AIn-8/16 Rev. C: Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  59
Pro-AIn-8/16 Rev. C: Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  59
Pro-AIn-8/16-D Rev. C: Pin assignment differential . . . . . . . . . . . . . . . . . .  60
Pro-AIn-8/16 Rev. C: Board and front panel . . . . . . . . . . . . . . . . . . . . . . . .  60
Pro-AIn-32/16 Rev. B: Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  61
Pro-AIn-32/16 Rev. B: Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  61
Pro-AIn-32/16 Rev. B: Pin assignment single-ended . . . . . . . . . . . . . . . . .  62
Pro-AIn-32/16 Rev. B: Pin assignment differential . . . . . . . . . . . . . . . . . . .  62
Pro-AIn-32/16 Rev. B: Board and front panel . . . . . . . . . . . . . . . . . . . . . . .  62
Pro-AIn-32/16 Rev. C: Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  63
Pro-AIn-32/16 Rev. C: Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  63
Pro-AIn-32/16 Rev. C: Pin assignment single-ended . . . . . . . . . . . . . . . . .  64
Pro-AIn-32/16 Rev. C: Pin assignment differential . . . . . . . . . . . . . . . . . . .  64
Pro-AIn-32/16 Rev. C: Board and front panel . . . . . . . . . . . . . . . . . . . . . . .  64
Pro-AIn-F-4/12 Rev. A: Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . .  65
Pro-AIn-F-4/12 Rev. A: Specification  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  65
Pro-AIn-F-4/12-D Rev. A: Pin assignment differential. . . . . . . . . . . . . . . . .  66
Pro-AIn-F-4/12 Rev. A: Board and front panel  . . . . . . . . . . . . . . . . . . . . . .  66
Pro-AIn-F-8/12 Rev. A: Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . .  67
Pro-AIn-F-8/12 Rev. A: Specification  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  67
Pro-AIn-F-8/12-D Rev. A: Pin assignment differential. . . . . . . . . . . . . . . . .  68
Pro-AIn-F-8/12 Rev. A: Board and front panel  . . . . . . . . . . . . . . . . . . . . . .  68
Pro-AIn-F-8/12 Rev. A: Function of the potentiometers  . . . . . . . . . . . . . . .  68
Pro-AIn-F-4/14 Rev. B: Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . .  69
Pro-AIn-F-4/14 Rev. B: Specification  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  69
Pro-AIn-F-4/14-D  Rev. B: Pin assignment differential . . . . . . . . . . . . . . . .  70
Pro-AIn-F-4/14 Rev. B: Board and front panel  . . . . . . . . . . . . . . . . . . . . . .  70
Pro-AIn-F-8/14 Rev. B: Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . .  71
Pro-AIn-F-8/14 Rev. B: Specification  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  71
Pro-AIn-F-8/14-D  Rev. B: Pin assignment differential . . . . . . . . . . . . . . . .  72
Pro-AIn-F-8/14 Rev. B: Board and front panel  . . . . . . . . . . . . . . . . . . . . . .  72
Pro-AIn-F-4/16 Rev. A: Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . .  73
Pro-AIn-F-4/16 Rev. A: Specification  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  73
Pro-AIn-F-4/16-D Rev. A: Pin assignment differential. . . . . . . . . . . . . . . . .  74
Pro-AIn-F-4/16 Rev. A: Board and front panel  . . . . . . . . . . . . . . . . . . . . . .  74
Pro-AIn-F-8/16 Rev. A: Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . .  75
Pro-AIn-F-8/16 Rev. A: Specification  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  75
Pro-AIn-F-8/16-D Rev. A: Pin assignment differential. . . . . . . . . . . . . . . . .  76
Pro-AIn-F-8/16 Rev. A: Board and front panel  . . . . . . . . . . . . . . . . . . . . . .  76
Pro-AOut-4/16 Rev. A: Block diagram  . . . . . . . . . . . . . . . . . . . . . . . . . . . .  78
Pro-AOut-4/16 Rev. A: Specification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  78
Pro-AOut-4/16-D Rev. A: Pin assignment differential . . . . . . . . . . . . . . . . .  79
Pro-AOut-4/16 Rev. A: Board and front panel. . . . . . . . . . . . . . . . . . . . . . .  79
Pro-AOut-8/16 Rev. A: Block diagram  . . . . . . . . . . . . . . . . . . . . . . . . . . . .  80
Pro-AOut-8/16 Rev. A: Specification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  80
Pro-AOut-8/16-D Rev. A: Pin assignment differential . . . . . . . . . . . . . . . . .  81
Pro-AOut-8/16 Rev. A: Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  81

Summary of Contents for ADwin-Pro



























































































































































































































Reviews:

No comments

Related manuals for ADwin-Pro

FAAC 740 D Manual preview
740 D
Brand: FAAC Pages: 14
OMA 505C Manual preview
505C
Brand: OMA Pages: 73
Waterway OASIS Instruction Manual preview
OASIS
Brand: Waterway Pages: 16
DAV TECH DA 250 Installation And Maintenance Manual preview
DA 250
Brand: DAV TECH Pages: 10
VAT 670 Series Installation, Operating, & Maintenance Instructions preview
670 Series
Brand: VAT Pages: 39
Samson 3730-6 Mounting And Operating Instructions preview
3730-6
Brand: Samson Pages: 124
Samson TROVIS 5500 Operating Instructions Manual preview
TROVIS 5500
Brand: Samson Pages: 86
VAC V100 Troubleshooting Manual preview
V100
Brand: VAC Pages: 5
Idex Pulsafeeder MPC Vector Installation, Operation & Maintenance Manual preview
Pulsafeeder MPC Vector
Brand: Idex Pages: 114
Xylem CentriPro Aquavar SOLO Instruction Manual preview
CentriPro Aquavar SOLO
Brand: Xylem Pages: 48
OPW PetroVend PV200 Options Installation preview
PetroVend PV200
Brand: OPW Pages: 2
Haes ELAN HS-5100 User Manual preview
ELAN HS-5100
Brand: Haes Pages: 42
Water Specialist WS1TT Drawings And Service Manual preview
WS1TT
Brand: Water Specialist Pages: 36
Hanma HM-R01-RC Instructions preview
HM-R01-RC
Brand: Hanma Pages: 3
Festo Compact Performance Series Programming And Diagnosis preview
Compact Performance Series
Brand: Festo Pages: 58
GSi Grain PNEG-1509 Troubleshooting And Reference Manual preview
Grain PNEG-1509
Brand: GSi Pages: 70
Junkers MB LAN Installation Instruction preview
MB LAN
Brand: Junkers Pages: 68
UUGear Witty Pi 3 User Manual preview
Witty Pi 3
Brand: UUGear Pages: 38

Brands by name

Popular brands

Load more brands