How to Install an ADwin-Pro System
ADwin
2
ADwin-Pro
Hardware, manual version 2.9, June 2006
2 How to Install an
ADwin-Pro
System
Please keep strictly to the following order:
1. Start with the manual "
ADwin
installation":
• Installation of software and interface drivers from the
ADwin
-CDROM.
• Initialization of data connection from PC to
ADwin
system as well
as operational test.
2. First steps with the
ADbasic
Tutorial .
3. Programming in
ADbasic
.
The
ADbasic
manual describes the real-time development environment,
the structure of an
ADbasic
program and gives hints for optimizations.
You also find all this information in the
ADbasic
online help.
The
ADbasic
instructions are described in these documents:
For operation, please pay attention to the notes in this manual concerning the
respective modules.
•
ADbasic
manual:
Basic instructions for calculation, pro-
gram structure and process control.
•
ADwin-Pro
software
manual:
Instructions and hints for accessing
the Pro modules.
• Online help:
Instructions from both
ADbasic
man-
ual and
ADwin-Pro
software manual.
Please note:
For
ADwin
systems to function correctly, adhere strictly to the information pro-
vided in this documentation and in other mentioned manuals.
Qualified personnel
Programming, start-up and operation, as well as the modification of program
parameters must be performed only by appropriately qualified personnel.
Qualified personnel are persons who, due to their education, experience
and training as well as their knowledge of applicable technical stan-
dards, guidelines, accident prevention regulations and operating condi-
tions, have been authorized by a quality assurance representative at the
site to perform the necessary acivities, while recognizing and avoiding
any possible dangers.
(Definition of qualified personnel as per VDE 105 and ICE 364).
Availability of the
documents
This product documentation and all documents referred to, have always to be
available and to be strictly observed. For damages caused by disregarding the
information in this documentation or in all other additional documentations, no
liability is assumed by the company
Jäger Computergesteuerte Messtechnik
GmbH
, Lorsch, Germany.
Legal information
This documentation, including all pictures is protected by copyright. Reproduc-
tion, translation as well as electronical and photographical archiving and mod-
ification require a written permission by the company
Jäger Computergesteu-
erte Messtechnik GmbH
, Lorsch, Germany.
OEM products are mentioned without referring to possible patent rights, the
existence of which, may not be excluded.
Subject to change.
