Jäger ADwin-Pro, System And Hardware Description

Page: 92 / 218

Pro I: Analog Output Modules
Pro-AOut-8/16 Rev. C
ADwin
88
ADwin-Pro Hardware, manual version 2.9, June 2006
5.6.5 Pro-AOut-8/16 Rev. C
The analog output module Pro-AOut-8/16 Rev. C has eight 16-bit DACs and
the same functions as the previous module (Rev. B).
The output voltage range of the DACs is set to ±10V bipolar and can’t be
changed. Offset and gain are adjusted by software (see
chapter 6.3.1 "Cali-
bration per Software" ).
The outputs are available with the following connectors:
– Pro-AOut-8/16: shielded LEMO-sockets, CAMAC European norm.
– Pro-AOut-8/16-D: DSub socket 37-pin.
Fig. 159 – Pro-AOut-8/16 Rev. C : Block diagram
Output channels 8 single ended
Resolution 16-bit
Settling time to 0.01% FSR < 3µs
Output voltage ±10V
Output current max. ±5mA per channel for optimal function
±35 mA technically possible, short-cir-
cuit-proof
Accuracy INL ±2 LSB typical
DNL ±1 LSB typical
Offset error adjustable
Gain error adjustable
Offset drift ±10 µV/ºC
Connectors 8 LEMO sockets
optional: 37-pin D-SUB socket
Fig. 160 – Pro-AOut-8/16 Rev. C : Specification
2
ADwi
n
-Pro
bus
Addr.
Data
Data
Register
Address
Decoder
InAmp
+
-
D
A
1
8
LPF
InAmp
+
-
LPF
InAmp
+
-
LPF
D
A
D
A
. . . . .
. . . . . . . . . . . . . . .
Data
AGND
AGND
AGND