Jäger ADwin-Pro, System And Hardware Description

Page: 14 / 218

ADwin-Pro-mini
ADwin
10
ADwin-Pro Hardware, manual version 2.9, June 2006
4.5 ADwin-Pro-mini
The ADwin-Pro-mini enclosure is available in 3 versions, each of which works
with a different power supply voltage. In any case an external power supply unit
is required.
The enclosure type ADwin-Pro-mini for Pro II is being developped.
Pro-mini with 5 slots
Fig. 10 – Enclosure ADwin-Pro -mini
The required power of the external power supply unit depends on the type and
number of the used modules; we recommend a power of at least 20W.
The connector for the external power supply unit as well as a 4A fuse can be
found at the rear of the
ADwin-Pro -mini enclosure (see fig. 12 ).
Fig. 12 – Enclosure ADwin-Pro -mini:
Rear and detail of the pin assignment
At the rear of the enclosure you will find a label with the revision number:
Number of Slots 5
Main dimensions (l x w x h)
Slot area (w x h) 253mm × 147.3mm × 146mm
20 HP × 3 U
Fuse 4A, delayed-action fuse
External power supply unit external power supply unit required
mini 5V DC, 4A
mini-2 10V…18V DC
mini-3 20V…36V DC
Fig. 11 – Enclosure ADwin-Pro-mini Specification
Revision Release Previous versions
A 1998 First version
4 1 2 3 5
1 2 3
1 2 3
JÄGER MESSTECHNIK GmbH LORSCH
FUSE
POWER
5 VDC T 4A
1 2 3
1 2 3
V
CC
GND PE