IBM 88553RX, Installation Manual

Page: 172 / 232

158
IBM
Eserver
xSeries 455 Planning and Installation Guide
Figure 4-49 EFI Boot Manager - Select this option to boot from the CD-ROM
4. The SUSE LINUX welcome screen appears.
The installation procedure is like any other version of SUSE LINUX. This will
let you select your installation method or boot a rescue environment.
5. Select linux and press Enter to begin the installation. This will boot the YaST2
software that will help you to select the packages that you may want to install.
It will also help you with the hardware configuration and then will install all the
packages.
Manually starting the CD-ROM: If you did not have the CD-ROM inserted
before the EFI Boot Manager menu loaded, do the following:
1. Insert SUSE LINUX Disk 1 into the drive.
2. Select EFI Shell and press Enter.
3. Enter the command
map -r to remap all file systems.
4. Enter exit to go back to the Boot Manager menu.
5. Select the CD-ROM entry Ata(Primary,Master)/CD.
IBM Firmware Boot Manager x455
Version 2.00 [2.10] (c) copyright IBM Corporation 2003
Boot options: Enter number or / to select, 'Enter' to execute
1 EFI Shell [Built-in]
2 Acpi(PNP0A03,0)/Pci(5|1)/Ata(Primary,Master)
3 Acpi(PNP0A03,0)/Pci(5|1)/Ata(Primary,Master)/CDROM(Entry0)
4 Acpi(PNP0A03,0)/Pci(5|1)/Ata(Primary,Master)/CDROM(Entry1)
5 Acpi(PNP0A03,1)/Pci(4|0)/Mac(0002551F809E)
6 Acpi(PNP0A03,1)/Pci(4|1)/Mac(0002559F809E)
System options: Enter letter / or to select, 'Enter' to execute
Boot Option Maintenance Diagnostics EFI Shell
Configuration/Setup Driver Setup Flash
Messages:
Select this
option to boot
the CD-ROM