IBM 88553RX, Installation Manual

Page: 118 / 232

104
IBM
Eserver
xSeries 455 Planning and Installation Guide
Figure 4-8 Driver configuration menu
There are repeated entries for the Ethernet and SCSI drivers, as the machine
has two Ethernet ports and two SCSI channels.
The selections in this menu are described below.
Configuring PCI IDE/ATAPI Bus Driver
This option allows you to enable or disable IDE devices. The options are simple
yes or no answers. See figure Figure 4-9 for an example.
Figure 4-9 Configuring PCI IDE/ATAPI Bus Driver
When this is complete you will be prompted to press Enter to restart the
controller. This restarts the controller and rescans all the devices in the machine.
Configuring Broadcom Gigabit Ethernet Driver
There were no options available as the time of writing; selecting 02 or 03 returns
you immediately to the EFI Firmware Boot Manager. This may change in future
updates to the EFI or Broadcom firmware.
Enable Primary Master (Y/N)? -->Y
Enable Primary Slave (Y/N)? -->N
Enable Secondary Master (Y/N)? -->N
Enable Secondary Slave (Y/N)? -->