IBM 88553RX, Installation Manual

Page: 147 / 232

Chapter 4. Installation
133
Two-chassis configuration:
a. Select 2 x455 chassis as the scalable partition configuration.
b. Type a scalable partition ID.
c. Type the ASM host name or IP address for the secondary node.
d. If a remote I/O enclosure is attached (See Figure 4-36), complete the
following steps:
i. Select the number of PCI-X slots available to each RXE Expansion
Port on the remote I/O enclosure.
ii. Select the destination of Expansion Port A on the remote I/O
enclosure.
iii. Select the destination of Expansion Port B on the remote I/O
enclosure.
Figure 4-36 Two-node configuration with RXE-100
Four-chassis configuration:
a. Select 4 x455 chassis as the scalable partition configuration.
b. Type a scalable partition ID.
c. Type the ASM host names or IP addresses for the secondary nodes.