IBM 88553RX, Installation Manual

Page: 144 / 232

130
IBM
Eserver
xSeries 455 Planning and Installation Guide
Figure 4-33 Confirming the delete request
3. Select Yes to delete the option.
4. Save and exit.
5. The option has now been removed from the boot options.
Changing the TimeOut value
To change the TimeOut value follow the steps below:
1. Select Set Auto Boot TimeOut from the EFI Boot Maintenance Manager.
The following screen will be displayed.
2. Set the timeout value.
3. Save and exit.
Important: In the unlikely event that you have major problems and are not
able to get back the default options, then connect an auxiliary console (ANSI
terminal connected to the serial port) and press Shift+R when prompted to
restore the EFI defaults.
EFI Boot Maintenance Manager ver 1.10 [14.61]
Delete Boot Option(s). Select an Option
Windows Server 2003, Datacenter
EFI Shell [Built-in]
Acpi(PNP0A03,0)/Pci(5|1)/Ata(Primary,Master)
Acpi(PNP0A03,0)/Pci(5|1)/Ata(Primary,Master)/CDROM(Entry0)
Acpi(PNP0A03,0)/Pci(5|1)/Ata(Primary,Master)/CDROM(Entry1)
Acpi(PNP0A03,1)/Pci(4|0)/Mac(0002551F808F)
Acpi(PNP0A03,1)/Pci(4|1)/Mac(0002559F808F)
Delete All Boot Options
Save Settings to NVRAM
Help
Exit
Delete selected Boot Option [Y-Yes N-No]: 78F531)/
\EFI\Microsoft\WINNT50\ia6 4ldrBoot0006
WINDOWS