IBM 866441Y - Netfinity 5600 - 8664, Hardware Maintenance Manual

Page: 196 / 276

bracket and cage nuts; then, finger-tighten the
screws.
4. Attach the cable-management arm to the left rear of
the rack enclosure.
a. Align the cable-management-arm mounting
bracket with the cage nuts on the rear mounting
rail.
b. Insert two M6 by 16-mm screws to secure the
mounting bracket to the rack.
.1/
Right rear
.2/
Left rear
.3/
Right front
.4/
Left front
.5/
Hitch pin
c. Attach the free end of the cable-management
arm to the rear of the left slide rail, using a hitch
pin
.5/
.
Installing the server:
Complete the following
procedure to install the server into the rack enclosure.
1. Mount the server on the slide rails.
a. Attach the large wheel-shaped knobs
.1/
to the
sides of the server, near the rear of the server.
188
Netfinity Server HMM