IBM 866441Y - Netfinity 5600 - 8664, Hardware Maintenance Manual

Page: 195 / 276

Cage
nuts
Clip
nuts
3. Attach the slide rails to the rack.
a. Insert the left slide rail
.1/
rear bracket pin into
the hole between the two cage nuts for the slide
rail at the rear of the rack. The two holes in the
rear bracket line up with the cage nuts.
b. Pull the slide rail front bracket to the front of the
rack; insert the front bracket pin into the hole
above the cage nuts for the slide rail. The two
holes in the front bracket line up with the cage
nuts.
c. Do the same for the other slide rail.
.2/
Left rear
.3/
Left front
.1/
Left slide rail
d. From the outside of the rack enclosure, insert
two M6 by 16-mm screws through each slide rail
Netfinity 5600 - Type 8664
187