background image

1

PCATX-R9 User’s Guide

Introduction

Chapter 1

Introduction

Welcome to your BSI (Broadax Systems, Inc.) FieldGo PCATX-R9 portable

workstation. Your FieldGo PCATX-R9 workstation is one member of an entire

family of portable computers and workstations designed by BSI.

Founded in 1986, BSI is one of the pioneers in the portable computer indus-

try. BSI started by producing a transportable PC with an integrated mono-

chrome CRT display. In 1987, BSI introduced its first flat panel portable PC-AT

system with a backlit supertwist nematic monochrome LCD. It represented

BSI's successful effort in reducing the overall size and weight of a portable

PC, while retaining all the expansion capacities of a desktop computer. Since

then, BSI has continued to expand to the current lines we now have.

Your FieldGo PCATX-R9 workstation is designed to provide the full power of a

desktop computer, and the ability to use standard add-on cards in a rugged

portable package suitable for use in harsh environments. It features five drive

bays, a large, bright flat panel LCD, detachable keyboard with integrated

pointing device, 300W power supply, and a carrying case.

Combining cutting-edge processors and peripherals, your new FieldGo

PCATX-R9 sets a new standard for portable computational power by deliver-

ing performance, versatile system configuration, high level of expandability,

and reliability that can ultimately increase your productivity.

Summary of Contents for FieldGo PCATX-R9









































Reviews: