IBM 866441Y - Netfinity 5600 - 8664, Hardware Maintenance Manual

Page: 60 / 276

Checking the system for damage
This section provides instructions on what to do if the
server might be damaged.
After dropping it:
Look for loose cables and
obvious damage. If any cables are loose, reconnect them
securely.
If you see no damage, turn on the server. If it works
correctly, the server probably did not suffer any damage.
Observe all electrostatic precautions listed in this book to
avoid damage to the server.
If the server does not work correctly, turn it off and check
the adapters and memory modules to ensure that they are
connected correctly; then, reseat all adapters and memory
modules.
If the server still does not work correctly, run the diagnostic
tests from the diagnostic utility menu. For information
about running tests, see “Running diagnostic programs” on
page 10.
After spilling liquid on it:
If liquid gets on the
keyboard:
1. Turn off the server.
2. Unplug the keyboard from the back of the server.
3. Turn the keyboard upside down to drain excess liquid.
4. Dry off the keyboard with a lint-free cloth.
After the keyboard is completely dry, plug it in and turn on
the server. If it does not work correctly, replace the
keyboard.
If liquid gets inside the monitor:
1. Turn off the monitor.
2. Turn off the server.
3. Unplug the monitor from the server and the electrical
outlet.
If liquid gets inside the server:
1. Turn off the server and all attached devices.
2. Unplug the server from the electrical outlet and all
attached devices.
52
Netfinity Server HMM