IBM 866441Y - Netfinity 5600 - 8664, Hardware Maintenance Manual

Page: 56 / 276

Note
The order of installation is important. The IBM
Netfinity Hot Plug for Windows NT Server 4.0 package
must be installed before the IBM Netfinity 10/100 Fault
Tolerant Adapter driver is installed. If the adapter
device driver is installed before the PCI Hot Plug
Solution package, the adapter device driver will not
recognize the hot-plug code. This happens because
the adapter device driver only checks the NT registry
for the Hot Plug package during installation. If the PCI
Hot Plug Solution package is added after the adapter
device driver is installed, the adapter must be
removed and added again in order for it to detect the
PCI Hot-Plug Solution code.
To install the IBM Failover DMI Agent:
1. Download the DMI EXE file from the Netfinity Support
web page and extract the files onto a diskette.
2. Insert the diskette into the diskette drive.
3. From the Start menu, select the Run option.
4. Type A:\SETUP.EXE in the Open box.
5. Click Ok. The setup wizard opens.
6. Follow the instructions given by the setup wizard until
the program is installed.
7. Restart the server.
To install the IBM PCI Hot Plug Solution package:
1. Download the IBM PCI Hot Plug Services EXE file
from the Netfinity Support web page and extract the
files onto a diskette.
2. Log on to Windows NT Server as a user in the
Administrator group.
3. Insert the diskette into the diskette drive.
4. From the Start menu, select the Run option.
5. Type A:\SETUP.EXE in the Open box.
6. Click OK. The Setup wizard opens.
7. Follow the instructions given by the setup wizard until
the program is installed.
Windows NT Server failover setup:
To install the
IBM Netfinity 10/100 Fault Tolerant Adapter device drivers:
1. Add the redundant NIC adapter according to the
instructions provided with the adapter and in “Working
with adapters” on page 107.
2. Use the ServerGuide CDs to install the AMD PCNet
Ethernet Family adapter device driver. (Refer to the
“ServerGuide and Netfinity Manager Information”
section of this
Server Library.)
3. Do not select the Grouping box at this point; you must
first restart the machine.
4. From the Windows NT Server desktop, select Control
Panel, then select the Network icon, then select the
Adapters tab.
48
Netfinity Server HMM