IBM 866441Y - Netfinity 5600 - 8664, Hardware Maintenance Manual

Page: 152 / 276

Completing the rack model installation:
To
complete the installation for the rack model:
1. Install the top cover, if it was removed.
2. Install the trim bezel, if it was removed.
3. Restart the server.
4. Update device records and reconfigure the server
(see “Updating device records and reconfiguring the
server” on page 60).
To install the server top cover:
.1/
Top cover
.2/
Side latches
.3/
Flanges
a. Align the top cover
.1/
with the top of the server,
about 25 mm (1 inch) from the front of the server;
the flanges on the left and right sides of the
cover should be on the outside of the server
chassis.
b. Hold the cover against the server and slide the
cover toward the front of the server until the
cover clicks into place.
To install the trim bezel:
144
Netfinity Server HMM