IBM 866441Y - Netfinity 5600 - 8664, Hardware Maintenance Manual

Page: 200 / 276

d. Using a screwdriver, tighten the screws that hold
the front of the slide rails to the front of the rack.
e. Slide the server into the rack enclosure again
until the slide latches on the front chassis
brackets click into place.
6. (Optional) For additional security, such as when
transporting the rack, fasten the server to the rack
enclosure by inserting a M6 by 16-mm screw through
the chassis bracket, mounting rail, and cage nut on
each side.
7. Connect all server and device cables and connectors.
8. Use the server configuration program to reconfigure
the server.
Because of the new orientation of the server, you
must change the server configuration so that the
Netfinity Manager program will show a graphic of a
rack model for this server instead of showing a tower
model.
a. Press the power control button to turn on the
server, and watch the display.
b. When the messages
Press F1 for
Configuration/Setup
and
Press F2 for
Diagnostics
appear, Press F1.
c. Select System Information; then select Product
Data.
d. Change the machine type and model from a
tower model to a rack model.
1) Find the machine type and model in the
Tower column in the following table.
2) Change it to the machine type and model
shown in the Rack column.
Tower Rack
8664-11Y 8664-1RY
8664-21Y 8664-2RY
8664-31Y 8664-3RY
192
Netfinity Server HMM