IBM 866441Y - Netfinity 5600 - 8664, Hardware Maintenance Manual

Page: 114 / 276

2. Locate the flange
.1/
on the top edge of the door.
3. Press down on the flange while pressing out on the
door; then lift the server door up and off the hinge.
Set the door aside in a safe place.
Removing the trim bezel:
Refer to the following
illustrations while you perform the steps in this procedure.
Tower model
CPU
VRM
MEMOR
Y HDD
PCI B
US
NMI
SMI
SER
VICE PR
OCESSOR
BU
S
NON REDUND
ANT
PO
WER SUPPL
Y
1 2 3
A B
1 2 3
FA
N
TEMPERA
TURE
2
3
Rack model
.1/
Bezel-release lever
.2/
Trim bezel
.3/
Side with bezel tabs and slots
To remove the trim bezel:
1. Move the blue bezel release lever
.1/
following the
curve of the lever opening.
2. Lift the bezel tabs out of the slots
.3/
and pull the
bezel
.2/
away from the server front. Store the bezel
in a safe place.
106
Netfinity Server HMM