IBM 866441Y - Netfinity 5600 - 8664, Hardware Maintenance Manual

Page: 35 / 276

Using the System Configuration Utility
main menu
From the System Configuration Utility main menu, you can
select settings that you want to change. The System
Configuration Utility main menu is similar to the following
screen.
IBM Netfinity Setup - © Copyright IBM Corporation
<F1> Help < > < > Move
<Esc> Exit <Enter> Select
↑ ↓
•
•
•
•
•
•
•
•
System Summary
System Information
Devices and I/O Ports
Date and Time
System Security
Start Options
Advanced Setup
Event/Error Logs
Save Settings
Restore Settings
Load Default Settings
Exit Setup
Configuration/Setup Utility
Pressing F1 displays Help information for a selected menu
item.
Note
The choices on some menus might differ slightly,
depending on the BIOS version that comes with the
server.
To change configuration settings:
1. Use the Up Arrow (
↑
) or Down Arrow (
↓
) key to
highlight the menu item for the configuration setting
that you want to change; then, press Enter.
2. Use the Left Arrow (
←
) or Right Arrow (
→
) key to
choose the appropriate setting for the selected menu
item; then, press Enter.
3. Repeat step 1 through step 2 for each setting that
you want to change. Press Esc to return to the
System Configuration Utility main menu.
4. After making changes, you can select:
Ÿ
Save Settings to save the selected changes.
Ÿ
Restore Settings to delete the changes and
restore the previous settings.
Ÿ
Load Default Settings to cancel the changes
and restore the factory settings.
Netfinity 5600 - Type 8664
27