IBM 866441Y - Netfinity 5600 - 8664, Hardware Maintenance Manual

Page: 148 / 276

the diagnostic LED panel (see “Diagnostics panel
LEDs” on page 196) and the LEDs located on the fan
assemblies.
3. Remove the fan assembly from the server by
pressing the orange release latch (
.3/
,
.6/
, or
.8/
)
for the fan and pulling the fan away from the server.
4. Slide the replacement fan assembly into the server
until it clicks into place.
5. Verify that the FAN LED on the diagnostic panel is
not lit. If the FAN LED is lit, reseat the fan.
6. Replace the cover. For a tower model, see
“Completing the tower model installation” on
page 141. For a rack model, see “Completing the
rack model installation” on page 144.
140
Netfinity Server HMM