IBM 866441Y - Netfinity 5600 - 8664, Hardware Maintenance Manual

Page: 85 / 276

2. Log in to the Netfinity Advanced System Management
processor.
When you have established a connection with the
Netfinity Advanced System Management processor,
you will be prompted for a user name and password.
You must provide a user name and password
combination that has been previously configured for
use with the Netfinity Advanced System Management
processor. You can use one of two user name and
password combinations:
Ÿ
The default user name (USERID) and password
(PASSW0RD)
Note
The default user name and password are
case sensitive. You must use
ALL CAPS,
and the “0” in PASSW0RD is the numeral
zero.
Ÿ
A user name and password that you define using
the Netfinity Advanced System Management
processor and Netfinity Manager
Important
For security purposes, change the user name
and password using the Netfinity Advanced
System Management processor.
If you update the Netfinity Advanced System
Management processor microcode, the default
user name (USERID) and password
(PASSW0RD) are reset. If you had previously
changed them, you will need to change them
again.
When you have logged into the Netfinity Advanced
System Management processor, the following main
menu appears:
2 Monitors
3 Error Logs
4 Service Processor Configuration
5 System Services
6 System Power
7 Boot
B Remote Terminal Status
Y Disconnect Current Logon
Z Start Remote Video
3. Select 7 Boot.
The following Boot menu appears:
1 Reboot w/OS Shutdown
2 Reboot immediately
4 Restart SP
4. Select a Boot menu item.
Netfinity 5600 - Type 8664
77