IBM 866441Y - Netfinity 5600 - 8664, Hardware Maintenance Manual

Page: 165 / 276

Slide the server backward or forward as
necessary until the notches meet.
d. Attach the rails to the sides of the server with M4
by 5-mm screws.
2. Remove the wheel-shaped knobs from the server.
Store the knobs in a safe place to use if you need to
remove the server from the rack at a later time.
3. Press the safety latches on the slide rails
.1/
and
slide the server about halfway into the rack enclosure.
Note
When the server is fully extended, safety latches
on the slide rails lock into place. This prevents
the server from being accidentally pulled out too
far and dropped. To release the safety latch,
press in.
Netfinity 5600 - Type 8664
157