IBM 866441Y - Netfinity 5600 - 8664, Hardware Maintenance Manual

Page: 84 / 276

Important
For security purposes, change the user name
and password using the Netfinity Advanced
System Management processor.
If you update the Netfinity Advanced System
Management processor microcode, the default
user name (USERID) and password
(PASSW0RD) are reset. If you had previously
changed them, you will need to change them
again.
When you have logged into the Netfinity Advanced
System Management processor, the following main
menu opens:
2 Monitors
3 Error Logs
4 Service Processor Configuration
5 System Services
6 System Power
7 Boot
B Remote Terminal Status
Y Disconnect Current Logon
Z Start Remote Video
3. Select 6 System Power.
The following System Power menu opens:
1 Current Power Status
2 Power Configuration
3 Power On
4 Power Off
4. Select a System Power menu item.
Ÿ
Select 1 Current power Status for information
about the current server power status.
Ÿ
Select 2 Power Configuration for information
about the server power configuration.
Ÿ
Select 3 Power On to turn the server on (if it is
currently off).
Ÿ
Select 4 Power Off to turn the server off (if it is
currently on).
Boot Menu Selections:
You can use the
selections available from the Boot menu to:
Ÿ
Shut down the server operating system and then
restart the server
Ÿ
Restart the server immediately, without first
performing an operating system shutdown
Ÿ
Restart the Netfinity Advanced System Management
processor
To access these functions:
1. Use a terminal program to establish a connection with
the Netfinity Advanced System Management
processor modem.
76
Netfinity Server HMM