IBM 866441Y - Netfinity 5600 - 8664, Hardware Maintenance Manual

Page: 217 / 276

POST error codes
In the following error codes, X can be any number or letter.
Error Code/Symptom FRU/Action
062
(Three consecutive boot
failures using the default
configuration.) 1. Run
Configuration/Setup
2. Battery
3. Processor Board
4. System Board
101, 102
(System and processor
error) 1. Processor Board
2. System Board
106
(System and processor
error) 1. Processor Board
2. System Board
111
(Channel check error) 1. Memory DIMM
2. Processor Board
3. System Board
114
(Adapter read-only memory
error) 1. Failing Adapter
2. Run Diagnostics
129
(Internal Cache error) 1. Processor
2. Optional Processor
(if installed)
3. Processor Board
151
(Real time clock error) 1. Run Diagnostics
2. Battery
3. System Board
161
(Real time clock battery
error) 1. Run
Configuration/Setup
2. Battery
3. System Board
162
(Device Configuration Error)
Important
Be sure to load the
default settings and
any additional desired
settings; then, save
the configuration.
1. Run
Configuration/Setup
2. Battery
3. Failing Device
4. System Board
163
(Real-Time Clock error) 1. Run
Configuration/Setup
2. Battery
3. System Board
164
(Memory configuration
changed) 1. Run
Configuration/Setup
2. DIMM
3. Processor Board
173
(System CMOS checksum
bad) 1. Run
Configuration/Setup
2. Battery
3. System Board
Netfinity 5600 - Type 8664
209