IBM 866441Y - Netfinity 5600 - 8664, Hardware Maintenance Manual

Page: 198 / 276

3. Press the safety latches
.1/
on the slide rails and
slide the server about halfway into the rack enclosure.
Note
When the server is fully extended, safety latches
on the slide rails lock into place. This prevents
the server from being accidentally pulled out too
far and dropped. To release the safety latch,
press in.
4. Attach the cables to the server.
a. Attach the monitor, keyboard, and power cables
to the corresponding connectors on the server.
Refer to the rack enclosure documentation for
instructions.
b. Attach any other cables you removed before you
converted the server to a rack model.
c. Route all the cables through the
cable-management arm, attaching the cables to
the arm with the hook and loop fastener strips
provided. Tie wraps are provided for additional
cable management beyond the
cable-management arm.
190
Netfinity Server HMM