IBM 866441Y - Netfinity 5600 - 8664, Hardware Maintenance Manual

Page: 210 / 276

Diagnostic error codes
Attention
In the following error codes, if XXX is 000, 195, or 197
do not replace a FRU. The description for these error
codes are:
000 The test passed.
195 The Esc key was pressed to abort the
test.
197 This a warning error and may not
indicate a hardware failure.
For all other error codes, replace/follow the
FRU/Action indicated.
Error Code/Symptom FRU/Action
001-XXX-000
(Failed core tests) 1. System Board
001-250-001
(Failed ECC test) 1. Processor Board
2. System Board
005-XXX-000
(Failed Video test) 1. System Board
2. Processor Board
011-XXX-000
(Failed COM1 Serial Port
test) 1. System Board
011-XXX-001
(Failed COM2 Serial Port
test) 1. System Board
014-XXX-000
(Failed Parallel Port test) 1. System Board
015-XXX-001
(Failed USB test) 1. System Board
020-XXX-000
(Failed PCI Interface test) 1. System Board
2. Processor Board
030-XXX-000
(Failed internal SCSI
interface test) 1. System Board
030-XXX-00N
(Failed SCSI test on PCI
slot N. Check system error
log before replacing a FRU.) 1. Adapter on PCI slot N
035-XXX-099
(No adapters were found) 1. If adapter is installed,
recheck connections
035-XXX-199
(Failed RAID test on PCI
slot 1. Check system error
log before replacing a FRU.) 1. Adapter
2. SCSI Backplane
3. Cable
202
Netfinity Server HMM