IBM 866441Y - Netfinity 5600 - 8664, Hardware Maintenance Manual

Page: 182 / 276

Tower-to-Rack Conversion Kit
With the IBM

Netfinity

5600 Tower-to-Rack Conversion
Kit, you can convert your server from a tower model to a
rack model. This book provides instructions for installing a
conversion kit on your server and installing your server in a
rack enclosure. For additional information about the
Netfinity 5600 server, consult the “Hardware Information”
section of the Netfinity 5600
Server Library.
Note
Installing the server in a rack will require three people.
Inventory list:
The conversion kit contains the
following items:
Ÿ
Two chassis brackets
Ÿ
Two server covers
Ÿ
One service label
Ÿ
One rack-model trim bezel, with power-on switch
protector attached in a bag
Ÿ
Two wheel-shaped knobs
Ÿ
One or more packages of screws, some of which are
optional replacement screws
Ÿ
One installation template
Ÿ
One rack mounting kit
– Two slide-rail assemblies
– One cable-management arm assembly including
hitch pins
– One bag of screws and nuts
– Hook and loop fastener strips
– One packet of tiewraps
Ÿ
IBM Netfinity 5600 Tower-To-Rack Conversion Kit
Installation Instructions (this book)
Ÿ
IBM Netfinity 5600 Hot-Plug SCSI Setup Utility
diskette
What you will need:
You will need the following
items to install the conversion kit and to install the server
in a rack:
Ÿ
Flat-blade screwdriver
Ÿ
The documentation that comes with the rack
174
Netfinity Server HMM