IBM 866441Y - Netfinity 5600 - 8664, Hardware Maintenance Manual

Page: 126 / 276

Notes
1. The illustrations in this section might differ slightly
from your hardware.
2. To order additional microprocessor options,
contact your IBM reseller or IBM marketing
representative.
3. The microprocessor that is installed in
microprocessor connector U5 is CPU or
processor 1. If a microprocessor is installed in
microprocessor connector U6, it is CPU or
processor 2. If the server has only one
microprocessor installed, that microprocessor is
installed in microprocessor connector U5 and is
the startup (boot) processor. If more than one
microprocessor is installed, the microprocessor
with the lower stepping level is the startup
processor and the microprocessor with the higher
stepping level is the application processor. If
both microprocessors have the same stepping
level, the microprocessor installed in
microprocessor connector U6 is the startup
processor and the microprocessor installed in U5
is the application processor.
Note
You can determine the stepping levels of the installed
microprocessors using Configuration/Setup. See
“System Summary” on page 28.
Refer to the following illustrations while you perform the
steps in this section.
118
Netfinity Server HMM