IBM 866441Y - Netfinity 5600 - 8664, Hardware Maintenance Manual

Page: 180 / 276

Processor board/backplate removal
Before you begin:
Read “Safety information” on page 230.
Note
1. The illustrations in this book are similar to your
server; details might vary.
2. To replace the processor board/backplate
assembly, reverse this procedure. Care should
be taken in routing the system baord cables
when replacing the procesor baord.
To remove the processor board/backplate assembly, do
the following.
1. Power-off the server and all external devices; then,
disconnect the server from the power source.
2. Remove the server cover. See “Removing the
left-side cover (tower model)” on page 103 or
“Removing the cover (rack model)” on page 104.
3. Disconnect the processor board cables.
4. Release the processor board latch
.1/
; then. remove
the processor board for the server.
172
Netfinity Server HMM