IBM 866441Y - Netfinity 5600 - 8664, Hardware Maintenance Manual

Page: 164 / 276

.1/
Right rear
.2/
Left rear
.3/
Right front
.4/
Left front
.5/
Hitch pin
c. Attach the free end of the cable-management
arm to the rear of the left slide rail, using a hitch
pin
.5/
.
Installing the server:
To install the server in the
rack enclosure:
1. Mount the server on the slide rails.
a. Extend the slide rails fully from the rack until the
slide rails lock.
b. Rest the wheel-shaped knobs
.1/
on the slide
rails at a point close to the rack.
c. Lower the front of the server until the bottom
notch in each chassis bracket fits into the top
notch in the slide rail end.
156
Netfinity Server HMM