IBM 866441Y - Netfinity 5600 - 8664, Hardware Maintenance Manual

Page: 36 / 276

Note
The System Configuration Utility main menu
selections do not save settings, restore settings,
or load default settings for the PCI Slot/Device
Information choice. To save settings, or restore
settings for the PCI Slot/Device Information
choice, you
must use the menu selections
available from the PCI Slot/Device Information
choice.
5. To exit from the System Configuration Utility main
menu, select Exit Setup. If you made any changes
and did not save them with the Save Settings choice,
the system prompts you to save or discard the
changes when you attempt to exit from the System
Configuration Utility main menu.
System Summary:
Select this choice to display
configuration information, including the type and speed of
the microprocessors and amount of memory.
Changes that you make to configuration settings appear on
this summary screen. You cannot edit the fields.
The System Summary choice appears on the full System
Configuration Utility main menu and on the limited System
Configuration Utility main menu.
System Information:
Select this choice to display
information about the server. Changes that you make on
other menus might appear on this summary screen. You
cannot edit any fields. The System Information choice
appears only on the full System Configuration Utility main
menu.
Product Data:
Select this choice to view system
information, such as the machine type and model, the
system serial number, and the revision level or issue date
of the BIOS stored on the flash electronically erasable
programmable ROM (EEPROM).
System Card Data:
Select this choice to view vital
product data (VPD) for some server components.
Devices and I/O Ports:
Software recognizes ports
through their port assignments. Each port must have a
unique port assignment. The System Configuration Utility
program normally handles this, but you might have special
hardware or software that requires you to change these
assignments.
Select the Devices and I/O Ports choice to view or
change the assignments for devices and input/output ports.
28
Netfinity Server HMM