IBM 866441Y - Netfinity 5600 - 8664, Hardware Maintenance Manual

Page: 219 / 276

Error Code/Symptom FRU/Action
289
(DIMM has been disabled
the user or system) 1. Run
Configuration/Setup,
if disabled by user
2. Ensure if a DIMM was
added/changed that
the power was
disconnected.
3. Disabled DIMM, if not
disabled by user.
4. Processor Board
301
(Keyboard or keyboard
controller error) 1. Keyboard
2. System Board
303
(Keyboard controller error) 1. Keyboard
2. System Board
602
(Invalid diskette boot record) 1. Diskette
2. Cable
3. Diskette Drive
604
(Diskette drive error) 1. Run
Configuration/Setup
and Diagnostics
2. Diskette Drive
3. Drive Cable
4. System Board
605
(Unlock failure) 1. Diskette Drive
2. Drive Cable
3. System Board
662
(Diskette drive configuration
error) 1. Run
Configuration/Setup
and Diagnostics
2. Diskette Drive
3. Drive Cable
4. System Board
962
(Parallel port error) 1. Disconnect external
cable on parallel port.
2. Run
Configuration/Setup
3. System Board
11XX
(System board serial port 1
or 2 error) 1. Disconnect external
cable on serial port.
2. Run
Configuration/Setup
3. System Board
1301
(Cable to Information LED
panel not detected. 1. Cable
1302
(Cable to Power and Reset
pushbuttons not detected. 1. Cable
1303
(I2C cable to Power
Backplane not detected) 1. Cable
Netfinity 5600 - Type 8664
211