manualshive.com logo in svg

HP Fabric OS v7.0.1, Administrator'S Manual

Share
Download
HP Fabric OS v7.0.1 Administrator'S Manual Download Page 99

Fabric OS Administrator’s Guide

61

53-1002446-01

Configuring FLOGI-time handling of duplicate PWWN

3

Setting the behavior for handling duplicate PWWNs

1. Connect to the switch and log in using an account with admin permissions.

2. Enter the switchDisable command to disable the switch.

3. Enter the configure command.

4. Enter y after the F-Port login parameters prompt.

F-Port login parameters (yes, y, no, n): [no] 

y

5. Enter 1 at the Enforce FLOGI/FDISC login prompt to select the optional behavior for handling 

duplicate PWWNs.

Enforce FLOGI/FDISC login: (0..1) [0] 

1

Enter 0 at the Enforce FLOGI/FDISC login prompt to select the default behavior.

6. Respond to the remaining prompts, or press Ctrl-D to accept the other settings and exit.

7. Enter the switchEnable command to re-enable the switch.

With either setting, detection of duplicate PWWNs results in a RASLog. Ports that are restricted 
become persistently disabled, marked with the reason "Duplicate Port WWN detected".

TABLE 9

Duplicate PWWN behavior: Second login overrides existing login 

Input port Duplicate found on 

same F_Port

Duplicate found on different 
F_Port

Duplicate found on 
same NPIV port

Duplicate found on 
different NPIV port

FLOGI 
received

1

Implicit logout.

2

Send FLOGI ACC.

1

Logout different F-port.

2

Persistently disable 
different F-port.

3

RASLog  Duplicate 
Found.

4

FLOGI ACC to Input port.

N/A

1

Logout duplicate on 
different NPIV port.

2

RASLog  Duplicate 
Found.

3

FLOGI ACC to input 
port.

FDISC 
received

N/A

1

Logout different F-port

2

Persistently disable 
different F-port.

3

RASLog  Duplicate 
Found.

4

FDISC ACC to Input port.

Send FDISC ACC 
with previously 
assigned PID

1

Logout duplicate on 
different NPIV port.

2

RASLog  Duplicate 
Found.

3

FDISC ACC to input 
port.

Summary of Contents for Fabric OS v7.0.1









































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands