manualshive.com logo in svg

HP Fabric OS v7.0.1, Administrator'S Manual

Share
Download
HP Fabric OS v7.0.1 Administrator'S Manual Download Page 94

56

Fabric OS Administrator’s Guide

53-1002446-01

Track and control switch changes

3

Enabling the track changes feature

1. Connect to the switch and log in using an account with admin permissions.

2. Enter the trackChangesSet 1 command to enable the track changes feature.

A message displays, verifying that the track changes feature is on:

switch:admin> 

trackchangesset 1

 

Committing configuration...done.

3. View the log using the commands errDump |more to display a page at a time or errShow to 

view one line at a time.

2008/10/10-08:13:36, [TRCK-1001], 5, FID 128, INFO, ras007, Successful login 
by user admin.

Displaying the status of the track changes feature

1. Connect to the switch and log in using an account with admin permissions.

2. Enter the trackChangesShow command. 

The status of the track changes feature is displayed as either on or off. The display includes 
whether or not the track changes feature is configured to send SNMP traps.

switch:admin> 

trackchangesshow

 

Track changes status: ON
Track changes generate SNMP-TRAP: NO

Viewing the switch status policy threshold values

The policy parameter determines the number of failed or inoperable units for each contributor that 
triggers a status change in the switch. 

Each parameter can be adjusted so that a specific threshold must be reached before that 
parameter changes the overall status of a switch to MARGINAL or DOWN. For example, if the 
FaultyPorts DOWN parameter is set to 3, the status of the switch will change if three ports fail. Only 
one policy parameter needs to pass the MARGINAL or DOWN threshold to change the overall status 
of the switch.

For more information about setting policy parameters, see the 

Fabric Watch Administrator’s Guide

.

1. Connect to the switch and log in using an account with admin permissions.

2. Enter the switchStatusPolicyShow command.

Whenever there is a switch change, an error message is logged and an SNMP 
connUnitStatusChange trap is sent. 

The output is similar to the following:

ecp:admin> 

switchstatuspolicyshow

switch:admin> switchstatuspolicyshow

The current overall switch status policy parameters:

Down

Marginal

----------------------------------

PowerSupplies

0

0

Temperatures

0

0

Fans

1

0

Summary of Contents for Fabric OS v7.0.1









































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands