manualshive.com logo in svg

HP Fabric OS v7.0.1, Administrator'S Manual

Share
Download
HP Fabric OS v7.0.1 Administrator'S Manual Download Page 70

32

Fabric OS Administrator’s Guide

53-1002446-01

Switch activation and deactivation

2

Switch activation and deactivation

By default, the switch is enabled after power is applied and diagnostics and switch initialization 
routines have finished. You can disable and re-enable the switch as necessary. 

Disabling a switch

1. Connect to the switch and log in using an account assigned to the admin role.

2. Enter the switchDisable command. 

All Fibre Channel ports on the switch are taken offline. If the switch is part of a fabric, the fabric 
is reconfigured.

Enabling a switch

1. Connect to the switch and log in using an account assigned to the admin role.

2. Enter the switchEnable command. 

All Fibre Channel ports that passed Power On Self Test (POST) are enabled. If the switch has 
inter-switch links (ISLs) to a fabric, it joins the fabric.

Switch and Backbone shutdown

To avoid corrupting your file system, Brocade recommends that you perform graceful shutdowns of 
Brocade switches and Backbones. 

Warm reboot

 (also known as 

graceful shutdown

) refers to shutting down the switch or platform by 

way of the following instructions. 

Cold boot

 (also known as a 

hard boot

) refers to shutting down the 

switch or platform by suddenly shutting down power and powering on again.

Powering off a Brocade switch

The following procedure describes how to gracefully shut down a switch.

1. Connect to the switch and log in using an account assigned to the admin role.

2. Enter the sysShutdown command.

3. Enter y at the prompt.

switch:admin> 

sysshutdown

This command will shutdown the operating systems on your switch.
You are required to power-cycle the switch in order to restore operation.
Are you sure you want to shutdown the switch [y/n]?

y

4. Wait until the following message displays:

Broadcast message from root (ttyS0) Wed Jan 25 16:12:09 2006...

The system is going down for system halt NOW !!
INIT: Switching to runlevel: 0
INIT: Sending processes the TERM signal
Unmounting all filesystems.

Summary of Contents for Fabric OS v7.0.1









































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands