manualshive.com logo in svg

HP Fabric OS v7.0.1, Administrator'S Manual

Share
Download
HP Fabric OS v7.0.1 Administrator'S Manual Download Page 239

Fabric OS Administrator’s Guide

201

53-1002446-01

Firmware download from a USB device

9

Slot 7 (CP1, active): Firmware has been downloaded to the secondary partition 
of the switch.

[5]: Mon Mar 22 04:37:24 2010
Slot 7 (CP1, standby): The firmware commit operation has started. This may 
take up to 10 minutes.

[6]: Mon Mar 22 04:41:59 2010
Slot 7 (CP1, standby): The commit operation has completed successfully.

[7]: Mon Mar 22 04:41:59 2010
Slot 7 (CP1, standby): Firmwaredownload command has completed successfully. 
Use firmwareshow to verify the firmware versions.

11. Enter the firmwareShow command to display the new firmware versions. 

Firmware download from a USB device

The Brocade 300, 5100, 5300, 6505, 6510, 7800, 8000, and VA-40FC switches and the Brocade 
DCX, DCX-4S, or DCX 8510 Backbones support a firmware download from a Brocade branded USB 
device attached to the switch or active CP. Before the USB device can be accessed by the 
firmwareDownload command, it must be enabled and mounted as a file system. The firmware 
images to be downloaded must be stored under the relative path from 

/usb/usbstorage/brocade/firmware

 or use the absolute path in the USB file system. Multiple 

images can be stored under this directory. There is a 

firmwarekey

 directory where the public key 

signed firmware is stored.

When the firmwareDownload command line option,

 

-U

 

(upper case)

,

 is specified, the 

firmwareDownload command downloads the specified firmware image from the USB device. When 
specifying a path to a firmware image in the USB device, you can only specify the relative path to 

/firmware

 or the absolute path. 

Enabling USB

1. Log in to the switch using an account assigned to the admin role.

2. Enter the usbStorage -e command.

Viewing the USB file system

1. Log in to the switch using an account assigned to the admin role.

2. Enter the usbStorage -l command.

BrcdDCXBB:admin> 

usbstorage –l

firmware\               381MB    2010 Mar 28 15:33
  v7.0.0\               381MB    2010 Mar 28 10:39
config\                 0B       2010 Mar 28 15:33
support\                0B       2010 Mar 28 15:33
firmwarekey\            0B       2010 Mar 28 15:33
Available space on usbstorage 79%

Summary of Contents for Fabric OS v7.0.1









































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands