manualshive.com logo in svg

HP Fabric OS v7.0.1, Administrator'S Manual

Share
Download
HP Fabric OS v7.0.1 Administrator'S Manual Download Page 188

150

Fabric OS Administrator’s Guide

53-1002446-01

Authentication policy for fabric elements

7

Example of setting a secret key pair

switchA:admin> 

secauthsecret --set

This command is used to set up secret keys for the DH-CHAP authentication.
The minimum length of a secret key is 8 characters and maximum 40
characters. Setting up secret keys does not initiate DH-CHAP
authentication. If switch is configured to do DH-CHAP, it is performed
whenever a port or a switch is enabled.

Warning: Please use a secure channel for setting secrets. Using
an insecure channel is not safe and may compromise secrets.

Following inputs should be specified for each entry.

1. WWN for which secret is being set up.
2. Peer secret: The secret of the peer that authenticates to peer.
3. Local secret: The local secret that authenticates peer.

Press Enter to start setting up shared secrets >

 <cr>

Enter WWN, Domain, or switch name (Leave blank when done): 

10:20:30:40:50:60:70:80

Enter peer secret: 

<hidden>

Re-enter peer secret: 

<hidden>

Enter local secret: 

<hidden>

Re-enter local secret: 

<hidden>

Enter WWN, Domain, or switch name (Leave blank when done): 

10:20:30:40:50:60:70:81

Enter peer secret: 

<hidden>

Re-enter peer secret: 

<hidden>

Enter local secret: 

<hidden>

Re-enter local secret: 

<hidden>

Enter WWN, Domain, or switch name (Leave blank when done): 

<cr>

Are you done? (yes, y, no, n): [no] 

y

Saving data to key store… Done.

3. Disable and enable the ports on a peer switch using the portDisable and portEnable 

commands.

FCAP configuration overview

Beginning with Fabric OS release 7.0.0, you must configure the switch to use third-party certificates 
for authentication with the peer switch.

To perform authentication with FCAP protocol with certificates issued from third party, the user has 
to perform following steps:

1. Choose a certificate authority (CA).

2. Generate a public, private key, passphrase and a CSR on each switch.

3. Store the CSR from each switch on a file server.

4. Obtain the certificates from the CA.

Summary of Contents for Fabric OS v7.0.1









































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands