manualshive.com logo in svg

HP Fabric OS v7.0.1, Administrator'S Manual

Share
Download
HP Fabric OS v7.0.1 Administrator'S Manual Download Page 69

Fabric OS Administrator’s Guide

31

53-1002446-01

Fabric name

2

Fabric name

You can assign a alphanumeric name to identify and manage a logical fabric that formerly could 
only be identified by a fabric ID. The fabric name does not replace the fabric ID or its usage. The 
fabric continues to have a fabric ID, in addition to the assigned alphanumeric fabric name.

Note the considerations:

•

Each name must be unique for each logical switch within a chassis; duplicate fabric names are 
not allowed.

•

A fabric name can be from 1 through 128 alphanumeric characters.

•

All switches in a logical fabric must be running Fabric OS v7.0.1. Switches running earlier 
versions of the firmware can co-exist in the fabric, but do not show the fabric name details.

•

You must have admin permissions to configure the fabric name.

Configuring the fabric name

To set and display the fabric name, use the fabricname command as shown in the following 
example:

switch:user> 

fabricname --set myfabric@1

Using the fabricname

 --

set command without a fabric name takes the existing fabric name and 

synchronizes it across the entire fabric. An error message displays if no name is configured.

To set a fabric name that includes spaces, enclose the fabric name in quotes, as shown here:

switch:user> 

fabricname --set "my new fabric"

To set a fabric name that includes bash special meta-characters or spaces, use the command 
fabricname as shown in the following example: 

switch:user> 

fabricname --set 'red fabric $$'

To clear the fabric name, use the fabricname

 --

clear command.

High availability considerations for fabric names

Fabric names locally configured or obtained from a remote switch are saved in the configuration
database, and then synchronized to the standby CP on dual-CP-based systems.

Upgrade and downgrade considerations for fabric names

Fabric names are lost during a firmware downgrade. No default fabric name is provided. If a fabric 
name is needed, it must be configured after the upgrade.

Config file upload and download considerations for fabric names

A new key, “fabric name” is added to store the user configuration. You can only configure fabric 
names using config download when the switch is offline.

Summary of Contents for Fabric OS v7.0.1









































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands