manualshive.com logo in svg

HP Fabric OS v7.0.1, Administrator'S Manual

Share
Download
HP Fabric OS v7.0.1 Administrator'S Manual Download Page 124

86

Fabric OS Administrator’s Guide

53-1002446-01

Local database user accounts

5

Admin Domain and Virtual Fabrics considerations: Administrators can act on other accounts only if 
that account has an Admin Domain or Logical Fabric list that is a subset of the administrator.

Displaying account information

1. Connect to the switch and log in using an account with admin permissions, or an account 

associated with a user-defined role with permissions for the UserManagement class of 
commands.

2. Enter the appropriate show operands for the account information you want to display:

•

userConfig

 --

show -a to show all account information for a switch

•

userConfig

 --

show username to show account information for the specified account 

•

userConfig

 --

showad -a adminDomain_ID to show all accounts permitted to select the 

specified adminDomain_ID

•

userConfig

 --

showlf -l logicalFabric_ID for each LF in an LF_ID_list, displays a list of users 

that include that LF in their LF permissions.

Creating an account

1. Connect to the switch and log in using an account with admin permissions, or an account 

associated with a user-defined role with permissions for the UserManagement class of 
commands.

2. Enter the userConfig

 --

add command. For example:

> 

userconfig --add metoo -l 1-128 -h 128 -r admin -c admin

This example creates a user account for the user metoo with the following properties:

•

Access to Virtual Fabrics 1 through 128

•

Default home logical switch to 128

•

Admin role permissions

•

Admin chassis role permissions

3. In response to the prompt, enter a password for the account. 

The password is not displayed when you enter it on the command line.

TABLE 14

Default local user accounts

Account name

Role

Admin Domain

Logical Fabric

Description

admin

Admin

AD0-255
home: 0

LF1-128
home: 128

Most commands have 

observe-modify

 permission.

factory

Factory

AD0-255
home: 0

LF1-128
home: 128

Reserved.

root

Root

AD0-255
home: 0

LF1-128
home: 128

Reserved.

user

User

AD0
home: 0

LF-128
home: 128

Most commands have 

observe-only

 

permission.

Summary of Contents for Fabric OS v7.0.1









































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands