manualshive.com logo in svg

HP Fabric OS v7.0.1, Administrator'S Manual

Share
Download
HP Fabric OS v7.0.1 Administrator'S Manual Download Page 243

Fabric OS Administrator’s Guide

205

53-1002446-01

Test and restore firmware on switches

9

User Name: 

userfoo

File Name: 

/home/userfoo/v7.0.0

Password: 

<hidden>

Do Auto-Commit after Reboot [Y]: 

n

Reboot system after download [N]: 

y

Firmware is being downloaded to the switch. This step may take up to 30 
minutes.
Checking system settings for firmwaredownload...

The switch performs a reboot and comes up with the new firmware to be tested. Your current 
switch session automatically disconnects.

ATTENTION

Downloading firmware to a switch can be disruptive to switch traffic.

7. Connect to the switch, log in as admin, and enter the firmwareShow command to confirm that 

the primary partition of the switch contains the new firmware.

You are now ready to evaluate the new version of firmware. 

ATTENTION

Stop! If you want to 

restore

 the firmware, stop here

 

and skip ahead to 

step 9

; otherwise, 

continue to 

step 8

 to commit the firmware on the switch, which completes the firmware 

download operations.

8. Commit the firmware.

a. Enter the firmwareCommit command to update the secondary partition with new firmware. 

Note that it takes several minutes to complete the commit operation.

b. Enter the firmwareShow command to confirm both partitions on the switch contain the 

new firmware.

ATTENTION

Stop! If you have completed 

step 8

, then you have committed the firmware on the switch and 

you have completed the firmware download procedure. 

9. Restore the firmware.

a. Enter the firmwareRestore command. The switch reboots and comes up with the original 

firmware again.

A firmwareCommit automatically begins to copy the original firmware from the primary 
partition to the secondary partition. At the end of the firmware commit process, both 
partitions have the original firmware. Note that it takes several minutes to complete the 
commit operation.

b. Wait five minutes to ensure that all processes have completed and the switch is fully up 

and operational. 

c. Log in to the switch. Enter the firmwareShow command and verify that both partitions on 

the switch have the original firmware.

Summary of Contents for Fabric OS v7.0.1









































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands