manualshive.com logo in svg

HP Fabric OS v7.0.1, Administrator'S Manual

Share
Download
HP Fabric OS v7.0.1 Administrator'S Manual Download Page 389

Fabric OS Administrator’s Guide

351

53-1002446-01

Admin Domain management for physical fabric administrators

17

Deactivating an Admin Domain

If you deactivate an Admin Domain, the members assigned to the Admin Domain can no longer 
access their hosts or storage unless those members are part of another Admin Domain.

You cannot log in to an Admin Domain that has been deactivated. You must activate an Admin 
Domain before you can log in to it.

1. Connect to the switch and log in using an account with admin permissions.

2. Disable the zone configuration under the Admin Domain you want to deactivate.

cfgdisable

3. Switch to the AD255 context, if you are not already in that context.

ad --select 255

4. Enter the ad 

--

deactivate command.

ad --deactivate 

ad_id

You are prompted for confirmation.

5. Enter the appropriate command based on whether you want to save or activate the Admin 

Domain definition:

•

To save the Admin Domain definition, enter ad 

--

save.

•

To save the Admin Domain definition and directly apply the definition to the fabric, enter ad 

--

apply.

All active user sessions associated with the Admin Domain are terminated. The ad 

--

deactivate command does not disable ports.

Example of deactivating Admin Domain AD_B4

switch:AD255:admin> 

ad --deactivate AD_B4

You are about to deactivate an AD.
This operation will fail if an effective zone configuration exists in the AD
Do you want to deactivate ’AD_B5’ admin domain (yes, y, no, n): [no] 

y

switch:AD255:admin>

Adding members to an existing Admin Domain

1. Connect to the switch and log in using an account with admin permissions.

2. Switch to the AD255 context, if you are not already in that context.

ad --select 255

3. Enter the ad 

--

add command using the -d option to specify device and switch port members 

and the -s option to specify switch members.

ad --add 

ad_id

 -d "

dev_list

" -s "

switch_list

"

In the syntax, 

ad_id

 is the Admin Domain name or number, 

dev_list

 is a list of device WWNs or 

domain,index 

members, and 

switch_list

 is a list of switch WWNs or domain IDs.

Summary of Contents for Fabric OS v7.0.1









































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands