manualshive.com logo in svg

HP Fabric OS v7.0.1, Administrator'S Manual

Share
Download
HP Fabric OS v7.0.1 Administrator'S Manual Download Page 380

342

Fabric OS Administrator’s Guide

53-1002446-01

Administrative Domains overview

17

FIGURE 53

Fabric with AD0 and AD255

Home Admin Domains and login

You are always logged in to an Admin Domain, and you can view and modify only the devices in that 
Admin Domain.

If you have access to more than one Admin Domain, one of them is designated as your 

home 

Admin Domain

, the one you are automatically logged in to. If your home Admin Domain is deleted 

or deactivated, then by default you are logged in to the lowest-numbered active Admin Domain in 
your Admin Domain list. The home Admin Domain, like the Admin Domain list, is a configurable 
property of a non-default user account. Here is some additional information about AD accounts:

•

You can log in to only one Admin Domain at a time. You can later switch to a different Admin 
Domain (refer to 

“Switching to a different Admin Domain context”

 on page 360 for 

instructions).

•

For default accounts such as admin and user, the home Admin Domain defaults to AD0 and 
cannot be changed. 

•

The Admin Domain list for the default admin account is 0 through 255, which gives this 
account automatic access to any Admin Domain as soon as the domain is created, and makes 
this account a physical fabric administrator. 

•

The Admin Domain list for the default user account is AD0 only.

•

For user-defined accounts, the home Admin Domain defaults to AD0 but an administrator can 
set the home Admin Domain to any Admin Domain to which the account is given access. 

•

If you are in any Admin Domain context other than AD0, the Admin Domain number is included 
in the system prompt displayed during your session. The following are example prompts for 
when you are in the AD0, AD1, and AD255 contexts, respectively:

switch:admin>
switch:AD1:admin>
switch:AD255:admin>

Summary of Contents for Fabric OS v7.0.1









































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands