manualshive.com logo in svg

HP Fabric OS v7.0.1, Administrator'S Manual

Share
Download
HP Fabric OS v7.0.1 Administrator'S Manual Download Page 200

162

Fabric OS Administrator’s Guide

53-1002446-01

Policy database distribution

7

Example shows the database distribution settings

switch:admin> 

fddcfg --showall

Local Switch Configuration for all Databases:-
     DATABASE  -  Accept/Reject
---------------------------------
          SCC  -         accept
          DCC  -         accept
          PWD  -         accept
          FCS  -         accept
         AUTH  -         accept
     IPFILTER  -         accept

Fabric Wide Consistency Policy:- ""

Enabling local switch protection

1. Connect to the switch and log in using an account with admin permissions, or an account with 

OM permissions for the FabricDistribution RBAC class of commands.

2. Enter the fddCfg

 --

localreject command.

Disabling local switch protection

1. Connect to the switch and log in using an account with admin permissions, or an account with 

OM permissions for the FabricDistribution RBAC class of commands.

2. Enter the fddCfg

 --

localaccept command.

ACL policy distribution to other switches

This section explains how to manually distribute local ACL policy databases. The distribute 
command has the following dependencies:

•

All target switches must be running Fabric OS v6.2.0 or later.

•

All target switches must accept the database distribution (see 

“Database distribution settings”

 

on page 161).

•

The fabric must have a tolerant or no (absent) fabric-wide consistency policy (see 

“Fabric-wide 

enforcement”

 on page 163).

If the fabric-wide consistency policy for a database is strict, the database cannot be manually 
distributed. When you set a strict fabric-wide consistency policy for a database, the distribution 
mechanism is automatically invoked whenever the database changes.

•

The local distribution setting must be accepted. To be able to initiate the distribute command, 
set the local distribution to accept.

Distributing the local ACL policies

1. Connect to the switch and log in using an account with admin permissions, or an account with 

OM permissions for the FabricDistribution RBAC class of commands.

2. Enter the distribute -p command.

Summary of Contents for Fabric OS v7.0.1









































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands