manualshive.com logo in svg

HP Fabric OS v7.0.1, Administrator'S Manual

Share
Download
HP Fabric OS v7.0.1 Administrator'S Manual Download Page 80

42

Fabric OS Administrator’s Guide

53-1002446-01

Ports

3

Port activation and deactivation

By default, all licensed ports are enabled. You can disable and re-enable them as necessary. Ports 
that you activate with the Ports on Demand license must be enabled explicitly, as described in 

“Ports on Demand”

 on page 385. 

If ports are persistently disabled and you use the portEnable command to enable a disabled port, 
the port will revert to being disabled after a power cycle or a switch reboot. To ensure the port 
remains enabled, use the portCfgPersistentEnable command as shown in the following 
instructions.

CAUTION

The fabric will be reconfigured if the port you are enabling or disabling is connected to another 
switch.

The switch with a port that has been disabled will be segmented from the fabric and all traffic 
flowing between it and the fabric will be lost.

Enabling a port

1. Connect to the switch and log in using an account with admin permissions.

2. Enter the appropriate command based on the current state of the port and on whether it is 

necessary to specify a slot number:

•

To enable a port that is disabled, enter the command portEnable 

portnumber

 or 

portEnable 

slotnumber/portnumber

.

•

To enable a port that is persistently disabled, enter the command portCfgPersistentEnable 

portnumber

 or portCfgPersistentEnable 

slotnumber/portnumber.

If you change port configurations during a switch failover, the ports may become disabled. To 
bring the ports online, re-issue the portEnable command after the failover is complete.

Disabling a port

1. Connect to the switch and log in using an account with admin permissions.

2. Enter the appropriate command based on the current state of the port and on whether it is 

necessary to specify a slot number:

•

To disable a port that is enabled, enter the command portDisable 

portnumber

 or 

portDisable 

slotnumber/portnumber

.

•

To disable a port that is persistently enabled, enter the command 
portCfgPersistentDisable 

portnumber

 or portCfgPersistentDisable 

slotnumber/portnumber.

Summary of Contents for Fabric OS v7.0.1









































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands