HP Fabric OS v7.0.1, Administrator'S Manual

Page: 538 / 584

500 Fabric OS Administrator’s Guide
53-1002446-01
Resource monitoring
24
Resource monitoring
It is possible to exhaust resources, such as proxy PIDs. Whenever a resource is exhausted,
Fabric OS generates an error message. The messages are described in the
Fabric OS Message
Reference .
You can monitor FC router resources using the fcrResourceShow command. The fcrResourceShow
command shows FCR resource limits and usage and includes the following:
•
LSAN zones and LSAN devices — The information shows the maximum versus the currently
used zones and device database entries. Each proxy or physical device constitutes an entry. If
LSAN zones are defined in two edge fabrics, they are counted as two and not one. One device
imported into multiple edge fabrics counts multiple times.
The default maximum number of LSAN zones is 3000. Refer to “Setting the maximum LSAN
count” on page 489 for information on changing this limit.
•
Proxy Device Slots — The physical and proxy devices use the 10,000 device slots.
The information shows the maximum pool size for translate phantom node and port WWNs and
shows the number of translate node and port WWNs from this pool.
•
Phantom Node WWNs
•
Phantom Port WWNs
•
Max proxy devices
•
Max NR_Ports
The following example shows the use of the fcrResourceShow command to display physical port
(EX_Port) resources.
switch:admin> fcrresourceshow
Daemon Limits:
Max Allowed Currently Used
-------------------------------
LSAN Zones: 3000 28
LSAN Devices: 10000 51
Proxy Device Slots: 10000 20
WWN Pool Size Allocated
---------------------------------
Phantom Node WWN: 8192 5413
Phantom Port WWN: 32768 16121
Port Limits:
Max proxy devices:
2000
Max NR_Ports: 1000
Currently Used(column 1: proxy, column 2: NR_Ports):
0 | 0 34
1 | 3 34
4 | 0 0
5 | 0 0
6 | 0 0
7 | 0 0
8 | 6 34
9 | 6 34
10 | 6 34
11 | 6 34